网络万千资源
服务广大工程师

FIDES WALLS-Retain 2019.035

FIDES WALLS-Retain用于计算挡土墙因为DIN/EAB/EAU。德国岩土工程学会的挖掘工作组发布了EAB中的挖掘计算建议书。这些建议均被WALLS-Retain应用。城市中的建筑物和结构以及高密度区域的新建筑对深基坑的安全性提出了很高的要求。已经开发了新的构造方法,并且已经改进了已知的片材方法。为了计算现有的安全水平,将需要对挖掘墙进行广泛的静力学计算。对几种结构变型的探索可以最佳地利用轴承储备。一层或多层的灌浆锚越来越多地用于挖掘墙的锚固。
效果特征

    • 各种墙体类型:士兵H型墙,钻孔桩墙,现浇混凝土墙,如钻孔,桩墙或隔墙,板桩墙等。
    • 根据新旧DIN 1054,SIA 262,OENORM和欧洲规范

进行计算

  • 壁的弯曲刚度可以在任何距离处变化或截面恒定
  • 根据经典DIN,库仑或库尔曼方法的活性,增加或中性土压力
  • 可以访问所有FIDES岩土工程计划通用的扩展土壤数据库
  • 可根据各种设计规范进行所有可能的土压力再分配
  • 任意载荷组为永久性,寿命载荷,有限和无限制的载荷和壁载荷(H,M),每个附加载荷的不同载荷数
  • 任何类型的支持措施:Anchors或Struts
  • 在任何施工阶段,锚点都可以设置为活动或施用
  • 任何数量的挖掘和回填阶段
  • 简单的数据传输到其他FIDES岩土工程计划,例如WALLS-FEA,FIDES-Slipcircle 或者FIDES-GeoStability
  • 通过滑动圈验证防止接地故障
  • 自动计算滑动圆或用户预定义滑动圆几何的半径和中心
  • 滑动圈的图形表示和输出图
  • 任意数量的土壤层,几何形状和地面水平
  • 任意数量的支撑:预应力,弹性或刚性,锚或支柱。通过分析深层破坏的安全性来计算合适的锚固长度
  • 对于任何挖掘阶段,可以定义:水平主动和被动土压力,水压和垫层模块变化
  • 根据Culmann / Gudehus的土压力
  • 弹性和预应力锚杆
  • 防止液压接地故障,具有多个地下水层的系统
  • 水压值可以从地下水流量和自由水面计算程序中导入; FIDES-Flow;

FIDES WALLS-Retain 2019.035 (挡土墙分析和设计)| 15 Mb

FIDES WALLS-Retain can use to calculation of Retainment walls due to DIN/EAB/EAU.The Working Group for Excavations of the German Society for Geotechnics publishes its Recommendations for Computations on Excavations in the EAB. These recommendations are applied by WALLS-Retain. Buildings and structures in the cities and new constructions in high density areas place large requirements against the safety of deep excavations. New construction methods have been developed and known sheeting methods have been improved. Extensive statics computations of the excavation walls will be necessary, in order to calculate the existing safety level. The exploration of several structural variants makes an optimal utilization of the bearing reserves possible. Grout anchors in one or in several layers are increasingly used for the anchorage of the excavation walls.
Performance characteristics

  • Various Wall types : Soldier H-Beam wall, drilling pile wall, In-situ concrete wall like bored and secand pile wall or diaphragm wall, sheet pile wall etc.
  • Calculation according to old and new DIN 1054, SIA 262, OENORM and Eurocode
  • The bending stiffness of the wall may be variable or section wise constant at any distances
  • Active, increased or neutral earth pressure according to classical DIN, Coulomb or Culmann methods
  • Can access the extended soil data base that is common to all FIDES geotechnics programs
  • All possible earth pressure redistributions according to various design codes are available
  • Arbitrary load groups as permanent, life load, limited and unlimited surchage loads and wall loads (H, M), different load-figures per surcharge load
  • Any types of supporting measures : Anchors or Struts
  • Anchors may be set active or pasive at any construction stage
  • Any number of excavation and backfill phases
  • Simple data transfer to other FIDES geotechnics programs, for example WALLS-FEA, FIDES-Slipcircle or FIDES-GeoStability
  • Safety against ground failure by means of Slip Circle verification
  • Automatic calculation of the radius and the center of the Slip Circle or of a user predefined Slip Circle geometry
  • Graphical presentation and output plot of the Slip Circles
  • Any number of soil layers, geometries and ground levels
  • Any number of supports : prestressed, elastic or stiff, Anchors or Struts. Calculation of the apropriate anchor length by analysis of safety against deep-seated failure
  • For any excavation stage it can be defined : horizontal active and passive earth pressure, water pressure and bedding module variation
  • Earth pressure according to Culmann/Gudehus
  • Elastic and prestressed Anchors
  • Safety against hydraulic ground failure, systems with several groundwater storeys
  • The water pressure values can be imported from the ground water flow and free water surface calculation of the program;FIDES-Flow;

HomePage: http://www.fides-dvp.de
Language: English
Operating Systems: Windows 7/8.x

下载地址 - Download Link

此版本资源不提供下载地址(VIP无法下载),如有兴趣请通过右侧联系方式来咨询我们!
It is not allowed for download directly,contact us if interesting.

1.请使用IDM下载工具下载,WinRAR 5.x解压缩,解压密码:www.poqsoft.com;
2.本站所有文件经卡巴斯基杀毒软件查杀,绝不带任何后门病毒;
3.初级VIP资源及免费资源自带安装说明,不提供技术支持和帮助;
4.何必浪费大量时间到处找,何必为了贪图便宜而被骗,专业技术绝对有保障。

赞(1) 打赏
未经允许不得转载:资源交互平台 » FIDES WALLS-Retain 2019.035
分享到: 更多 (0)

评论 抢沙发

评论前必须登录!

 

觉得文章有用就打赏一下文章作者

支付宝扫一扫打赏

微信扫一扫打赏