网络万千资源
服务广大工程师

NUMECA Fine/Turbo 13.1

NUMECA FINE/TURBO:可用于任何可压或不可压、定常或非定常、二维或三维的粘性或无粘内部(其中包括任何叶轮机械:轴流或离心,风机,压缩机,泵,液力变矩器,汽轮机,水轮机,船舶推进器,搅拌罐等。单级或多级,或整机,或任何其他内部流动:塔体,换热器,分离器,管道,涡壳,阀门,密封等)流动,和各种外部绕流(包括各种水下载运器,飞行器等)的数值模拟。


NUMECA Fine/Turbo 13.1 x64/11.2 Linux (涡轮空气动力学分析) | 620.8MB

NUMECA International, leading developer and provider of CFD software systems for the multi-physics design simulation and optimization of industrial products and processes, has released 13.1 version of FINE/Turbo, the latest version of the high accuracy multi-block structured Navier-Stokes CFD software dedicated to internal, multistage rotating and turbomachinery flow simulations.
FINE/Turbo is the fastest CFD suite for rotating machinery with incompressible and compressible fluids, from subsonic to hypersonic flow regimes. All types of multi-stage axial, radial or mixed-flow configurations are supported: compressors, turbines, pumps, fans, propellers or contra-rotating propellers. From meshing to results visualization, the FINE/Turbo application-oriented graphical user interface is intuitive, enabling fast project set-up and analysis.
Several improvements and new capabilities, have been introduced to ease your daily work and extend the scope of application of FINE/Turbo and FINE/Design3D, in particular:
– AutoGrid5: Snubber – new topology for real 3D geometry: non-axisymmetric, on any blade, with fillet
– AutoGrid5: Contra-rotating fan wizard for specific bypass configuration
– FINETurbo: Ability to run parallel computation using IntelMPI (set by default on Windows)
– FINE/Turbo: Ability to inject NLH acoustic mode at the inlet of a flow domain
– FINE/Turbo: Mesh deformation – Major improvements for mesh quality in tip gaps with sliding nodes
– FINE/Turbo: Mesh deformation – New Inverse Distance Weighting (IDW) method, all methods now compatible with NLH
– FINE/Turbo: Ability to use cooling/bleed module with condensable gas (including NLH)
– FINE/Turbo: Harmonic approach in two-way FSI modal coupling
– FINE/Turbo: New management of output parameters
– CFView: TurboWizard plug-in – Automatic turbomachinery-specific postprocessing
– CFView: Ability to synchronize the views
– CFView: Ability to control the view background
– FINE/Design3D: Perform optimization with FINE/Open coupling (centrifugal compressor application)
– FINE/Design3D: Support for strict constraints in design space

Language: English
Operating Systems: Windows 7/8.x/10.x 64Bit/RedHat Entrprise Linux 5.x-7.x


Download Link (下载地址)
NUMECA_FINE_Turbo_13.1_x64
NUMECA_FINE_Turbo_13.1_Docs_Tutorials.part1
NUMECA_FINE_Turbo_13.1_Docs_Tutorials.part2

Download 百度云 (VIP用户下载区)

您需要先后,才能查看此隐藏内容!You should to see hidden content.

1.请使用IDM下载工具下载,WinRAR 5.x解压缩,解压密码:www.poqsoft.com;
2.本站所有VIP会员文件经卡巴斯基杀毒软件查杀,绝不带任何后门病毒;
3.不要为了省顿饭钱浪费大量时间,不要为了贪图便宜而被骗,专业技术绝对有保障。

赞(0) 打赏
未经允许不得转载:资源交互平台 » NUMECA Fine/Turbo 13.1
分享到: 更多 (0)

评论 抢沙发

评论前必须登录!

 

觉得文章有用就打赏一下文章作者

支付宝扫一扫打赏

微信扫一扫打赏